DaeSSy Mounts

DaeSSy wheelchair mounts are available from Techcess to support and compliment your Communication Aid. Mounting systems are available in various styles and due to the wide range of additional components each mount can be assembled to best suit individual requirements.
A fitting service is available if required – at additional cost.
When ordering a mount please give details of wheelchair make and model. We are happy to discuss the  details of your mounting requirements before the order is placed.

 

Some examples of mounts are shown below but others are available – please contact us for details. You can also access more detailed mounting information direct on the supplier website www.aacmounts.com.

 

 

 

Positioner Mount

  • Highly adjustable, 2 articulating joints and height adjustment give 6 adjustment locations which allow changes in height, angle and positioning of any device

  • Quickly removable Suitable for most types of wheelchairs (check suitability for particular wheelchair before purchase)

  • Compatible with existing DaeSSy clamp components

  • The ideal Mount to transfer between 2 Wheelchairs (with a second clamp)

  • Will support a load up to 17kg (40Lbs)

Positioner MountPositioner Mount

 

Positioner Mount

Rigid Mounts

  • A sturdy and cost-effective mounting solution

  • Allows the mount to be attached in a secure position and positions the device precisely where required

  • Move and lock into a choice of 3 positions

  • Suitable for most standard wheelchairs

  • Quickly removed from the wheelchair

  • Also available in Locking version (suitable for Tilt-in-Space wheelchairs) and Height Adjustable version (particularly suitable for classroom chairs)

Rigid MountRigid Mount

 

Rigid Mount

Side-Folding Mounts

  • Folds from in front down to the side of the wheelchair

  • Quickly removable

  • Lift and lock into a choice of 3 positions

  • Suitable for most standard wheelchairs

  • Fully adjustable, allows precise positioning of a device

  • Also available in Locking version (suitable for Tilt-in-Space wheelchairs) and Height Adjustable version (particularly suitable for classroom chairs)

Side-Folding MountSide-Folding Mount

 

Side-Folding Mount

Rear-Folding Mounts

  • Folds from the front of the chair to behind the backrest – with or without the device attached

  • Suitable for power wheelchairs (check suitability for a particular wheelchair before purchase)

  • Fully adjustable, allows precise positioning of a device

  • Remains attached to the wheelchair

  • ‘Tailored’ to suit your requirements

  • Also available in locking version (to lock into forward position)

Rear-Folding Mount Rear-Folding Mount

 

Rear-Folding Mount

Desk Mount

  • The ideal companion to the range of DaeSSy Wheelchair Mounts 

  • Adjustable angle, allows a Communication Aid to be used on a desk at the same angle as when on the Wheelchair

Desk MountDesk Mount

 

Desk Mount

Bolt-on Desk Mount

  • When it is not possible or practical to attach a traditional wheelchair mount, the BDM can be bolted to a Wheelchair Tray, Tables, etc

  • Adjustable angle

Bolt-on Desk Mount Bolt-on Desk Mount

 

Bolt-on Desk Mount

 

 

Please click here for more information on the DaeSSy Mounts. You will require Adobe Acrobat Reader to view this printable PDF.